/* Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * http_filter.c --- HTTP routines which either filters or deal with filters.
 */

#include "apr.h"
#include "apr_strings.h"
#include "apr_buckets.h"
#include "apr_lib.h"
#include "apr_signal.h"

#define APR_WANT_STDIO          /* for sscanf */
#define APR_WANT_STRFUNC
#define APR_WANT_MEMFUNC
#include "apr_want.h"

#define CORE_PRIVATE
#include "util_filter.h"
#include "ap_config.h"
#include "httpd.h"
#include "http_config.h"
#include "http_core.h"
#include "http_protocol.h"
#include "http_main.h"
#include "http_request.h"
#include "http_vhost.h"
#include "http_connection.h"
#include "http_log.h"           /* For errors detected in basic auth common
                                 * support code... */
#include "apr_date.h"           /* For apr_date_parse_http and APR_DATE_BAD */
#include "util_charset.h"
#include "util_ebcdic.h"
#include "util_time.h"

#include "mod_core.h"

#if APR_HAVE_STDARG_H
#include <stdarg.h>
#endif
#if APR_HAVE_UNISTD_H
#include <unistd.h>
#endif

#define INVALID_CHAR -2

static long get_chunk_size(char *);

typedef struct http_filter_ctx {
    apr_off_t remaining;
    apr_off_t limit;
    apr_off_t limit_used;
    enum {
        BODY_NONE,
        BODY_LENGTH,
        BODY_CHUNK,
        BODY_CHUNK_PART
    } state;
    int eos_sent;
    char chunk_ln[32];
    char *pos;
    apr_off_t linesize;
    apr_bucket_brigade *bb;
} http_ctx_t;

static apr_status_t bail_out_on_error(http_ctx_t *ctx,
                                      ap_filter_t *f,
                                      int http_error)
{
    apr_bucket *e;
    apr_bucket_brigade *bb = ctx->bb;

    apr_brigade_cleanup(bb);
    e = ap_bucket_error_create(http_error,
                               NULL, f->r->pool,
                               f->c->bucket_alloc);
    APR_BRIGADE_INSERT_TAIL(bb, e);
    e = apr_bucket_eos_create(f->c->bucket_alloc);
    APR_BRIGADE_INSERT_TAIL(bb, e);
    ctx->eos_sent = 1;
    return ap_pass_brigade(f->r->output_filters, bb);
}

static apr_status_t get_remaining_chunk_line(http_ctx_t *ctx,
                                             apr_bucket_brigade *b,
                                             int linelimit)
{
    apr_status_t rv;
    apr_off_t brigade_length;
    apr_bucket *e;
    const char *lineend;
    apr_size_t len;

    /*
     * As the brigade b should have been requested in mode AP_MODE_GETLINE
     * all buckets in this brigade are already some type of memory
     * buckets (due to the needed scanning for LF in mode AP_MODE_GETLINE)
     * or META buckets.
     */
    rv = apr_brigade_length(b, 0, &brigade_length);
    if (rv != APR_SUCCESS) {
        return rv;
    }
    /* Sanity check. Should never happen. See above. */
    if (brigade_length == -1) {
        return APR_EGENERAL;
    }
    if (!brigade_length) {
        return APR_EAGAIN;
    }
    ctx->linesize += brigade_length;
    if (ctx->linesize > linelimit) {
        return APR_ENOSPC;
    }
    /*
     * As all buckets are already some type of memory buckets or META buckets
     * (see above), we only need to check the last byte in the last data bucket.
     */
    for (e = APR_BRIGADE_LAST(b);
         e != APR_BRIGADE_SENTINEL(b);
         e = APR_BUCKET_PREV(e)) {

        if (APR_BUCKET_IS_METADATA(e)) {
            continue;
        }
        rv = apr_bucket_read(e, &lineend, &len, APR_BLOCK_READ);
        if (rv != APR_SUCCESS) {
            return rv;
        }
        if (len > 0) {
            break;  /* we got the data we want */
        }
        /* If we got a zero-length data bucket, we try the next one */
    }
    /* We had no data in this brigade */
    if (!len || e == APR_BRIGADE_SENTINEL(b)) {
        return APR_EAGAIN;
    }
    if (lineend[len - 1] != APR_ASCII_LF) {
        return APR_EAGAIN;
    }
    /* Line is complete. So reset ctx->linesize for next round. */
    ctx->linesize = 0;
    return APR_SUCCESS;
}

static apr_status_t get_chunk_line(http_ctx_t *ctx, apr_bucket_brigade *b,
                                   int linelimit)
{
    apr_size_t len;
    int tmp_len;
    apr_status_t rv;

    tmp_len = sizeof(ctx->chunk_ln) - (ctx->pos - ctx->chunk_ln) - 1;
    /* Saveguard ourselves against underflows */
    if (tmp_len < 0) {
        len = 0;
    }
    else {
        len = (apr_size_t) tmp_len;
    }
    /*
     * Check if there is space left in ctx->chunk_ln. If not, then either
     * the chunk size is insane or we have chunk-extensions. Ignore both
     * by discarding the remaining part of the line via
     * get_remaining_chunk_line. Only bail out if the line is too long.
     */
    if (len > 0) {
        rv = apr_brigade_flatten(b, ctx->pos, &len);
        if (rv != APR_SUCCESS) {
            return rv;
        }
        ctx->pos += len;
        ctx->linesize += len;
        *(ctx->pos) = '\0';
        /*
         * Check if we really got a full line. If yes the
         * last char in the just read buffer must be LF.
         * If not advance the buffer and return APR_EAGAIN.
         * We do not start processing until we have the
         * full line.
         */
        if (ctx->pos[-1] != APR_ASCII_LF) {
            /* Check if the remaining data in the brigade has the LF */
            return get_remaining_chunk_line(ctx, b, linelimit);
        }
        /* Line is complete. So reset ctx->pos for next round. */
        ctx->pos = ctx->chunk_ln;
        return APR_SUCCESS;
    }
    return get_remaining_chunk_line(ctx, b, linelimit);
}


/* This is the HTTP_INPUT filter for HTTP requests and responses from
 * proxied servers (mod_proxy).  It handles chunked and content-length
 * bodies.  This can only be inserted/used after the headers
 * are successfully parsed.
 */
apr_status_t ap_http_filter(ap_filter_t *f, apr_bucket_brigade *b,
                            ap_input_mode_t mode, apr_read_type_e block,
                            apr_off_t readbytes)
{
    apr_bucket *e;
    http_ctx_t *ctx = f->ctx;
    apr_status_t rv;
    apr_off_t totalread;
    int http_error = HTTP_REQUEST_ENTITY_TOO_LARGE;
    apr_bucket_brigade *bb;

    /* just get out of the way of things we don't want. */
    if (mode != AP_MODE_READBYTES && mode != AP_MODE_GETLINE) {
        return ap_get_brigade(f->next, b, mode, block, readbytes);
    }

    if (!ctx) {
        const char *tenc, *lenp;
        f->ctx = ctx = apr_pcalloc(f->r->pool, sizeof(*ctx));
        ctx->state = BODY_NONE;
        ctx->pos = ctx->chunk_ln;
        ctx->bb = apr_brigade_create(f->r->pool, f->c->bucket_alloc);
        bb = ctx->bb;

        /* LimitRequestBody does not apply to proxied responses.
         * Consider implementing this check in its own filter.
         * Would adding a directive to limit the size of proxied
         * responses be useful?
         */
        if (!f->r->proxyreq) {
            ctx->limit = ap_get_limit_req_body(f->r);
        }
        else {
            ctx->limit = 0;
        }

        tenc = apr_table_get(f->r->headers_in, "Transfer-Encoding");
        lenp = apr_table_get(f->r->headers_in, "Content-Length");

        if (tenc) {
            if (!strcasecmp(tenc, "chunked")) {
                ctx->state = BODY_CHUNK;
            }
            /* test lenp, because it gives another case we can handle */
            else if (!lenp) {
                /* Something that isn't in HTTP, unless some future
                 * edition defines new transfer ecodings, is unsupported.
                 */
                ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, f->r,
                              "Unknown Transfer-Encoding: %s", tenc);
                return bail_out_on_error(ctx, f, HTTP_NOT_IMPLEMENTED);
            }
            else {
                ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, f->r,
                  "Unknown Transfer-Encoding: %s; using Content-Length", tenc);
                tenc = NULL;
            }
        }
        if (lenp && !tenc) {
            char *endstr;

            ctx->state = BODY_LENGTH;
            errno = 0;

            /* Protects against over/underflow, non-digit chars in the
             * string (excluding leading space) (the endstr checks)
             * and a negative number. */
            if (apr_strtoff(&ctx->remaining, lenp, &endstr, 10)
                || endstr == lenp || *endstr || ctx->remaining < 0) {

                ctx->remaining = 0;
                ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, f->r,
                              "Invalid Content-Length");

                return bail_out_on_error(ctx, f, HTTP_REQUEST_ENTITY_TOO_LARGE);
            }

            /* If we have a limit in effect and we know the C-L ahead of
             * time, stop it here if it is invalid.
             */
            if (ctx->limit && ctx->limit < ctx->remaining) {
                ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, f->r,
                          "Requested content-length of %" APR_OFF_T_FMT
                          " is larger than the configured limit"
                          " of %" APR_OFF_T_FMT, ctx->remaining, ctx->limit);
                return bail_out_on_error(ctx, f, HTTP_REQUEST_ENTITY_TOO_LARGE);
            }
        }

        /* If we don't have a request entity indicated by the headers, EOS.
         * (BODY_NONE is a valid intermediate state due to trailers,
         *  but it isn't a valid starting state.)
         *
         * RFC 2616 Section 4.4 note 5 states that connection-close
         * is invalid for a request entity - request bodies must be
         * denoted by C-L or T-E: chunked.
         *
         * Note that since the proxy uses this filter to handle the
         * proxied *response*, proxy responses MUST be exempt.
         */
        if (ctx->state == BODY_NONE && f->r->proxyreq != PROXYREQ_RESPONSE) {
            e = apr_bucket_eos_create(f->c->bucket_alloc);
            APR_BRIGADE_INSERT_TAIL(b, e);
            ctx->eos_sent = 1;
            return APR_SUCCESS;
        }

        /* Since we're about to read data, send 100-Continue if needed.
         * Only valid on chunked and C-L bodies where the C-L is > 0. */
        if ((ctx->state == BODY_CHUNK ||
            (ctx->state == BODY_LENGTH && ctx->remaining > 0)) &&
            f->r->expecting_100 && f->r->proto_num >= HTTP_VERSION(1,1) &&
            !(f->r->eos_sent || f->r->bytes_sent)) {
            if (!ap_is_HTTP_SUCCESS(f->r->status)) {
                ctx->state = BODY_NONE;
                ctx->eos_sent = 1;
            } else {
                char *tmp;
                int len;

                /* if we send an interim response, we're no longer
                 * in a state of expecting one.
                 */
                f->r->expecting_100 = 0;
                tmp = apr_pstrcat(f->r->pool, AP_SERVER_PROTOCOL, " ",
                                  ap_get_status_line(100), CRLF CRLF, NULL);
                len = strlen(tmp);
                ap_xlate_proto_to_ascii(tmp, len);
                apr_brigade_cleanup(bb);
                e = apr_bucket_pool_create(tmp, len, f->r->pool,
                                           f->c->bucket_alloc);
                APR_BRIGADE_INSERT_HEAD(bb, e);
                e = apr_bucket_flush_create(f->c->bucket_alloc);
                APR_BRIGADE_INSERT_TAIL(bb, e);

                ap_pass_brigade(f->c->output_filters, bb);
            }
        }

        /* We can't read the chunk until after sending 100 if required. */
        if (ctx->state == BODY_CHUNK) {
            apr_brigade_cleanup(bb);

            rv = ap_get_brigade(f->next, bb, AP_MODE_GETLINE,
                                block, 0);

            /* for timeout */
            if (block == APR_NONBLOCK_READ &&
                ( (rv == APR_SUCCESS && APR_BRIGADE_EMPTY(bb)) ||
                  (APR_STATUS_IS_EAGAIN(rv)) )) {
                ctx->state = BODY_CHUNK_PART;
                return APR_EAGAIN;
            }

            if (rv == APR_SUCCESS) {
                rv = get_chunk_line(ctx, bb, f->r->server->limit_req_line);
                if (APR_STATUS_IS_EAGAIN(rv)) {
                    apr_brigade_cleanup(bb);
                    ctx->state = BODY_CHUNK_PART;
                    return rv;
                }
                if (rv == APR_SUCCESS) {
                    ctx->remaining = get_chunk_size(ctx->chunk_ln);
                    if (ctx->remaining == INVALID_CHAR) {
                        rv = APR_EGENERAL;
                        http_error = HTTP_SERVICE_UNAVAILABLE;
                    }
                }
            }
            apr_brigade_cleanup(bb);

            /* Detect chunksize error (such as overflow) */
            if (rv != APR_SUCCESS || ctx->remaining < 0) {
                ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, f->r, "Error reading first chunk %s ", 
                              (ctx->remaining < 0) ? "(overflow)" : "");
                ctx->remaining = 0; /* Reset it in case we have to
                                     * come back here later */
                if (APR_STATUS_IS_TIMEUP(rv)) { 
                    http_error = HTTP_REQUEST_TIME_OUT;
                }
                return bail_out_on_error(ctx, f, http_error);
            }

            if (!ctx->remaining) {
                /* Handle trailers by calling ap_get_mime_headers again! */
                ctx->state = BODY_NONE;
                ap_get_mime_headers(f->r);
                e = apr_bucket_eos_create(f->c->bucket_alloc);
                APR_BRIGADE_INSERT_TAIL(b, e);
                ctx->eos_sent = 1;
                return APR_SUCCESS;
            }
        }
    }
    else {
        bb = ctx->bb;
    }

    if (ctx->eos_sent) {
        e = apr_bucket_eos_create(f->c->bucket_alloc);
        APR_BRIGADE_INSERT_TAIL(b, e);
        return APR_SUCCESS;
    }

    if (!ctx->remaining) {
        switch (ctx->state) {
        case BODY_NONE:
            break;
        case BODY_LENGTH:
            e = apr_bucket_eos_create(f->c->bucket_alloc);
            APR_BRIGADE_INSERT_TAIL(b, e);
            ctx->eos_sent = 1;
            return APR_SUCCESS;
        case BODY_CHUNK:
        case BODY_CHUNK_PART:
            {
                apr_brigade_cleanup(bb);

                /* We need to read the CRLF after the chunk.  */
                if (ctx->state == BODY_CHUNK) {
                    rv = ap_get_brigade(f->next, bb, AP_MODE_GETLINE,
                                        block, 0);
                    if (block == APR_NONBLOCK_READ &&
                        ( (rv == APR_SUCCESS && APR_BRIGADE_EMPTY(bb)) ||
                          (APR_STATUS_IS_EAGAIN(rv)) )) {
                        return APR_EAGAIN;
                    }
                    /* If we get an error, then leave */
                    if (rv != APR_SUCCESS) {
                        return rv;
                    }
                    /*
                     * We really don't care whats on this line. If it is RFC
                     * compliant it should be only \r\n. If there is more
                     * before we just ignore it as long as we do not get over
                     * the limit for request lines.
                     */
                    rv = get_remaining_chunk_line(ctx, bb,
                                                  f->r->server->limit_req_line);
                    apr_brigade_cleanup(bb);
                    if (APR_STATUS_IS_EAGAIN(rv)) {
                        return rv;
                    }
                } else {
                    rv = APR_SUCCESS;
                }

                if (rv == APR_SUCCESS) {
                    /* Read the real chunk line. */
                    rv = ap_get_brigade(f->next, bb, AP_MODE_GETLINE,
                                        block, 0);
                    /* Test timeout */
                    if (block == APR_NONBLOCK_READ &&
                        ( (rv == APR_SUCCESS && APR_BRIGADE_EMPTY(bb)) ||
                          (APR_STATUS_IS_EAGAIN(rv)) )) {
                        ctx->state = BODY_CHUNK_PART;
                        return APR_EAGAIN;
                    }
                    ctx->state = BODY_CHUNK;
                    if (rv == APR_SUCCESS) {
                        rv = get_chunk_line(ctx, bb, f->r->server->limit_req_line);
                        if (APR_STATUS_IS_EAGAIN(rv)) {
                            ctx->state = BODY_CHUNK_PART;
                            apr_brigade_cleanup(bb);
                            return rv;
                        }
                        if (rv == APR_SUCCESS) {
                            ctx->remaining = get_chunk_size(ctx->chunk_ln);
                            if (ctx->remaining == INVALID_CHAR) {
                                rv = APR_EGENERAL;
                                http_error = HTTP_SERVICE_UNAVAILABLE;
                            }
                        }
                    }
                    apr_brigade_cleanup(bb);
                }

                /* Detect chunksize error (such as overflow) */
                if (rv != APR_SUCCESS || ctx->remaining < 0) {
                    ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, f->r, "Error reading chunk %s ", 
                                  (ctx->remaining < 0) ? "(overflow)" : "");
                    ctx->remaining = 0; /* Reset it in case we have to
                                         * come back here later */
                    if (APR_STATUS_IS_TIMEUP(rv)) { 
                        http_error = HTTP_REQUEST_TIME_OUT;
                    }
                    return bail_out_on_error(ctx, f, http_error);
                }

                if (!ctx->remaining) {
                    /* Handle trailers by calling ap_get_mime_headers again! */
                    ctx->state = BODY_NONE;
                    ap_get_mime_headers(f->r);
                    e = apr_bucket_eos_create(f->c->bucket_alloc);
                    APR_BRIGADE_INSERT_TAIL(b, e);
                    ctx->eos_sent = 1;
                    return APR_SUCCESS;
                }
            }
            break;
        }
    }

    /* Ensure that the caller can not go over our boundary point. */
    if (ctx->state == BODY_LENGTH || ctx->state == BODY_CHUNK) {
        if (ctx->remaining < readbytes) {
            readbytes = ctx->remaining;
        }
        AP_DEBUG_ASSERT(readbytes > 0);
    }

    rv = ap_get_brigade(f->next, b, mode, block, readbytes);

    if (rv != APR_SUCCESS) {
        return rv;
    }

    /* How many bytes did we just read? */
    apr_brigade_length(b, 0, &totalread);

    /* If this happens, we have a bucket of unknown length.  Die because
     * it means our assumptions have changed. */
    AP_DEBUG_ASSERT(totalread >= 0);

    if (ctx->state != BODY_NONE) {
        ctx->remaining -= totalread;
        if (ctx->remaining > 0) {
            e = APR_BRIGADE_LAST(b);
            if (APR_BUCKET_IS_EOS(e))
                return APR_EOF;
        }
    }

    /* If we have no more bytes remaining on a C-L request,
     * save the callter a roundtrip to discover EOS.
     */
    if (ctx->state == BODY_LENGTH && ctx->remaining == 0) {
        e = apr_bucket_eos_create(f->c->bucket_alloc);
        APR_BRIGADE_INSERT_TAIL(b, e);
    }

    /* We have a limit in effect. */
    if (ctx->limit) {
        /* FIXME: Note that we might get slightly confused on chunked inputs
         * as we'd need to compensate for the chunk lengths which may not
         * really count.  This seems to be up for interpretation.  */
        ctx->limit_used += totalread;
        if (ctx->limit < ctx->limit_used) {
            ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, f->r,
                          "Read content-length of %" APR_OFF_T_FMT
                          " is larger than the configured limit"
                          " of %" APR_OFF_T_FMT, ctx->limit_used, ctx->limit);
            apr_brigade_cleanup(bb);
            e = ap_bucket_error_create(HTTP_REQUEST_ENTITY_TOO_LARGE, NULL,
                                       f->r->pool,
                                       f->c->bucket_alloc);
            APR_BRIGADE_INSERT_TAIL(bb, e);
            e = apr_bucket_eos_create(f->c->bucket_alloc);
            APR_BRIGADE_INSERT_TAIL(bb, e);
            ctx->eos_sent = 1;
            return ap_pass_brigade(f->r->output_filters, bb);
        }
    }

    return APR_SUCCESS;
}

/**
 * Parse a chunk extension, detect overflow.
 * There are two error cases:
 *  1) If the conversion would require too many bits, a -1 is returned.
 *  2) If the conversion used the correct number of bits, but an overflow
 *     caused only the sign bit to flip, then that negative number is
 *     returned.
 * In general, any negative number can be considered an overflow error.
 */
static long get_chunk_size(char *b)
{
    long chunksize = 0;
    size_t chunkbits = sizeof(long) * 8;

    ap_xlate_proto_from_ascii(b, strlen(b));

    if (!apr_isxdigit(*b)) {
        /*
         * Detect invalid character at beginning. This also works for empty
         * chunk size lines.
         */
        return INVALID_CHAR;
    }
    /* Skip leading zeros */
    while (*b == '0') {
        ++b;
    }

    while (apr_isxdigit(*b) && (chunkbits > 0)) {
        int xvalue = 0;

        if (*b >= '0' && *b <= '9') {
            xvalue = *b - '0';
        }
        else if (*b >= 'A' && *b <= 'F') {
            xvalue = *b - 'A' + 0xa;
        }
        else if (*b >= 'a' && *b <= 'f') {
            xvalue = *b - 'a' + 0xa;
        }

        chunksize = (chunksize << 4) | xvalue;
        chunkbits -= 4;
        ++b;
    }
    if (apr_isxdigit(*b) && (chunkbits <= 0)) {
        /* overflow */
        return -1;
    }

    return chunksize;
}

typedef struct header_struct {
    apr_pool_t *pool;
    apr_bucket_brigade *bb;
} header_struct;

/* Send a single HTTP header field to the client.  Note that this function
 * is used in calls to table_do(), so their interfaces are co-dependent.
 * In other words, don't change this one without checking table_do in alloc.c.
 * It returns true unless there was a write error of some kind.
 */
static int form_header_field(header_struct *h,
                             const char *fieldname, const char *fieldval)
{
#if APR_CHARSET_EBCDIC
    char *headfield;
    apr_size_t len;
    apr_size_t name_len;
    apr_size_t val_len;
    char *next;

    name_len = strlen(fieldname);
    val_len = strlen(fieldval);
    len = name_len + val_len + 4; /* 4 for ": " plus CRLF */
    headfield = (char *)apr_palloc(h->pool, len + 1);
    memcpy(headfield, fieldname, name_len);
    next = headfield + name_len;
    *next++ = ':';
    *next++ = ' ';
    memcpy(next, fieldval, val_len);
    next += val_len;
    *next++ = CR;
    *next++ = LF;
    *next = 0;
    ap_xlate_proto_to_ascii(headfield, len);
    apr_brigade_write(h->bb, NULL, NULL, headfield, len);
#else
    struct iovec vec[4];
    struct iovec *v = vec;
    v->iov_base = (void *)fieldname;
    v->iov_len = strlen(fieldname);
    v++;
    v->iov_base = ": ";
    v->iov_len = sizeof(": ") - 1;
    v++;
    v->iov_base = (void *)fieldval;
    v->iov_len = strlen(fieldval);
    v++;
    v->iov_base = CRLF;
    v->iov_len = sizeof(CRLF) - 1;
    apr_brigade_writev(h->bb, NULL, NULL, vec, 4);
#endif /* !APR_CHARSET_EBCDIC */
    return 1;
}

/* This routine is called by apr_table_do and merges all instances of
 * the passed field values into a single array that will be further
 * processed by some later routine.  Originally intended to help split
 * and recombine multiple Vary fields, though it is generic to any field
 * consisting of comma/space-separated tokens.
 */
static int uniq_field_values(void *d, const char *key, const char *val)
{
    apr_array_header_t *values;
    char *start;
    char *e;
    char **strpp;
    int  i;

    values = (apr_array_header_t *)d;

    e = apr_pstrdup(values->pool, val);

    do {
        /* Find a non-empty fieldname */

        while (*e == ',' || apr_isspace(*e)) {
            ++e;
        }
        if (*e == '\0') {
            break;
        }
        start = e;
        while (*e != '\0' && *e != ',' && !apr_isspace(*e)) {
            ++e;
        }
        if (*e != '\0') {
            *e++ = '\0';
        }

        /* Now add it to values if it isn't already represented.
         * Could be replaced by a ap_array_strcasecmp() if we had one.
         */
        for (i = 0, strpp = (char **) values->elts; i < values->nelts;
             ++i, ++strpp) {
            if (*strpp && strcasecmp(*strpp, start) == 0) {
                break;
            }
        }
        if (i == values->nelts) {  /* if not found */
            *(char **)apr_array_push(values) = start;
        }
    } while (*e != '\0');

    return 1;
}

/*
 * Since some clients choke violently on multiple Vary fields, or
 * Vary fields with duplicate tokens, combine any multiples and remove
 * any duplicates.
 */
static void fixup_vary(request_rec *r)
{
    apr_array_header_t *varies;

    varies = apr_array_make(r->pool, 5, sizeof(char *));

    /* Extract all Vary fields from the headers_out, separate each into
     * its comma-separated fieldname values, and then add them to varies
     * if not already present in the array.
     */
    apr_table_do((int (*)(void *, const char *, const char *))uniq_field_values,
                 (void *) varies, r->headers_out, "Vary", NULL);

    /* If we found any, replace old Vary fields with unique-ified value */

    if (varies->nelts > 0) {
        apr_table_setn(r->headers_out, "Vary",
                       apr_array_pstrcat(r->pool, varies, ','));
    }
}

/* Send a request's HTTP response headers to the client.
 */
static apr_status_t send_all_header_fields(header_struct *h,
                                           const request_rec *r)
{
    const apr_array_header_t *elts;
    const apr_table_entry_t *t_elt;
    const apr_table_entry_t *t_end;
    struct iovec *vec;
    struct iovec *vec_next;

    elts = apr_table_elts(r->headers_out);
    if (elts->nelts == 0) {
        return APR_SUCCESS;
    }
    t_elt = (const apr_table_entry_t *)(elts->elts);
    t_end = t_elt + elts->nelts;
    vec = (struct iovec *)apr_palloc(h->pool, 4 * elts->nelts *
                                     sizeof(struct iovec));
    vec_next = vec;

    /* For each field, generate
     *    name ": " value CRLF
     */
    do {
        vec_next->iov_base = (void*)(t_elt->key);
        vec_next->iov_len = strlen(t_elt->key);
        vec_next++;
        vec_next->iov_base = ": ";
        vec_next->iov_len = sizeof(": ") - 1;
        vec_next++;
        vec_next->iov_base = (void*)(t_elt->val);
        vec_next->iov_len = strlen(t_elt->val);
        vec_next++;
        vec_next->iov_base = CRLF;
        vec_next->iov_len = sizeof(CRLF) - 1;
        vec_next++;
        t_elt++;
    } while (t_elt < t_end);

#if APR_CHARSET_EBCDIC
    {
        apr_size_t len;
        char *tmp = apr_pstrcatv(r->pool, vec, vec_next - vec, &len);
        ap_xlate_proto_to_ascii(tmp, len);
        return apr_brigade_write(h->bb, NULL, NULL, tmp, len);
    }
#else
    return apr_brigade_writev(h->bb, NULL, NULL, vec, vec_next - vec);
#endif
}

/* Confirm that the status line is well-formed and matches r->status.
 * If they don't match, a filter may have negated the status line set by a
 * handler.
 * Zap r->status_line if bad.
 */
static void validate_status_line(request_rec *r)
{
    char *end;

    if (r->status_line) {
        int len = strlen(r->status_line);
        if (len < 3
            || apr_strtoi64(r->status_line, &end, 10) != r->status
            || (end - 3) != r->status_line
            || (len >= 4 && ! apr_isspace(r->status_line[3]))) {
            r->status_line = NULL;
        }
        /* Since we passed the above check, we know that length three
         * is equivalent to only a 3 digit numeric http status.
         * RFC2616 mandates a trailing space, let's add it.
         */
        else if (len == 3) {
            r->status_line = apr_pstrcat(r->pool, r->status_line, " ", NULL);
        }
    }
}

/*
 * Determine the protocol to use for the response. Potentially downgrade
 * to HTTP/1.0 in some situations and/or turn off keepalives.
 *
 * also prepare r->status_line.
 */
static void basic_http_header_check(request_rec *r,
                                    const char **protocol)
{
    if (r->assbackwards) {
        /* no such thing as a response protocol */
        return;
    }

    validate_status_line(r);

    if (!r->status_line) {
        r->status_line = ap_get_status_line(r->status);
    }

    /* Note that we must downgrade before checking for force responses. */
    if (r->proto_num > HTTP_VERSION(1,0)
        && apr_table_get(r->subprocess_env, "downgrade-1.0")) {
        r->proto_num = HTTP_VERSION(1,0);
    }

    /* kludge around broken browsers when indicated by force-response-1.0
     */
    if (r->proto_num == HTTP_VERSION(1,0)
        && apr_table_get(r->subprocess_env, "force-response-1.0")) {
        *protocol = "HTTP/1.0";
        r->connection->keepalive = AP_CONN_CLOSE;
    }
    else {
        *protocol = AP_SERVER_PROTOCOL;
    }

}

/* fill "bb" with a barebones/initial HTTP response header */
static void basic_http_header(request_rec *r, apr_bucket_brigade *bb,
                              const char *protocol)
{
    char *date;
    const char *server;
    header_struct h;
    struct iovec vec[4];

    if (r->assbackwards) {
        /* there are no headers to send */
        return;
    }

    /* Output the HTTP/1.x Status-Line and the Date and Server fields */

    vec[0].iov_base = (void *)protocol;
    vec[0].iov_len  = strlen(protocol);
    vec[1].iov_base = (void *)" ";
    vec[1].iov_len  = sizeof(" ") - 1;
    vec[2].iov_base = (void *)(r->status_line);
    vec[2].iov_len  = strlen(r->status_line);
    vec[3].iov_base = (void *)CRLF;
    vec[3].iov_len  = sizeof(CRLF) - 1;
#if APR_CHARSET_EBCDIC
    {
        char *tmp;
        apr_size_t len;
        tmp = apr_pstrcatv(r->pool, vec, 4, &len);
        ap_xlate_proto_to_ascii(tmp, len);
        apr_brigade_write(bb, NULL, NULL, tmp, len);
    }
#else
    apr_brigade_writev(bb, NULL, NULL, vec, 4);
#endif

    h.pool = r->pool;
    h.bb = bb;

    /*
     * keep the set-by-proxy server and date headers, otherwise
     * generate a new server header / date header
     */
    if (r->proxyreq != PROXYREQ_NONE) {
        const char *proxy_date;

        proxy_date = apr_table_get(r->headers_out, "Date");
        if (!proxy_date) {
            /*
             * proxy_date needs to be const. So use date for the creation of
             * our own Date header and pass it over to proxy_date later to
             * avoid a compiler warning.
             */
            date = apr_palloc(r->pool, APR_RFC822_DATE_LEN);
            ap_recent_rfc822_date(date, r->request_time);
            proxy_date = date;
        }
        form_header_field(&h, "Date", proxy_date);
        server = apr_table_get(r->headers_out, "Server");
        if (server) {
            form_header_field(&h, "Server", server);
        }
    }
    else {
        date = apr_palloc(r->pool, APR_RFC822_DATE_LEN);
        ap_recent_rfc822_date(date, r->request_time);
        form_header_field(&h, "Date", date);
        form_header_field(&h, "Server", ap_get_server_banner());
    }

    /* unset so we don't send them again */
    apr_table_unset(r->headers_out, "Date");        /* Avoid bogosity */
    apr_table_unset(r->headers_out, "Server");
}

AP_DECLARE(void) ap_basic_http_header(request_rec *r, apr_bucket_brigade *bb)
{
    const char *protocol;

    basic_http_header_check(r, &protocol);
    basic_http_header(r, bb, protocol);
}

static void terminate_header(apr_bucket_brigade *bb)
{
    char crlf[] = CRLF;
    apr_size_t buflen;

    buflen = strlen(crlf);
    ap_xlate_proto_to_ascii(crlf, buflen);
    apr_brigade_write(bb, NULL, NULL, crlf, buflen);
}

AP_DECLARE_NONSTD(int) ap_send_http_trace(request_rec *r)
{
    core_server_config *conf;
    int rv;
    apr_bucket_brigade *bb;
    header_struct h;
    apr_bucket *b;
    int body;
    char *bodyread = NULL, *bodyoff;
    apr_size_t bodylen = 0;
    apr_size_t bodybuf;
    long res = -1; /* init to avoid gcc -Wall warning */

    if (r->method_number != M_TRACE) {
        return DECLINED;
    }

    /* Get the original request */
    while (r->prev) {
        r = r->prev;
    }
    conf = (core_server_config *)ap_get_module_config(r->server->module_config,
                                                      &core_module);

    if (conf->trace_enable == AP_TRACE_DISABLE) {
        apr_table_setn(r->notes, "error-notes",
                      "TRACE denied by server configuration");
        return HTTP_METHOD_NOT_ALLOWED;
    }

    if (conf->trace_enable == AP_TRACE_EXTENDED)
        /* XX should be = REQUEST_CHUNKED_PASS */
        body = REQUEST_CHUNKED_DECHUNK;
    else
        body = REQUEST_NO_BODY;

    if ((rv = ap_setup_client_block(r, body))) {
        if (rv == HTTP_REQUEST_ENTITY_TOO_LARGE)
            apr_table_setn(r->notes, "error-notes",
                          "TRACE with a request body is not allowed");
        return rv;
    }

    if (ap_should_client_block(r)) {

        if (r->remaining > 0) {
            if (r->remaining > 65536) {
                apr_table_setn(r->notes, "error-notes",
                       "Extended TRACE request bodies cannot exceed 64k\n");
                return HTTP_REQUEST_ENTITY_TOO_LARGE;
            }
            /* always 32 extra bytes to catch chunk header exceptions */
            bodybuf = (apr_size_t)r->remaining + 32;
        }
        else {
            /* Add an extra 8192 for chunk headers */
            bodybuf = 73730;
        }

        bodyoff = bodyread = apr_palloc(r->pool, bodybuf);

        /* only while we have enough for a chunked header */
        while ((!bodylen || bodybuf >= 32) &&
               (res = ap_get_client_block(r, bodyoff, bodybuf)) > 0) {
            bodylen += res;
            bodybuf -= res;
            bodyoff += res;
        }
        if (res > 0 && bodybuf < 32) {
            /* discard_rest_of_request_body into our buffer */
            while (ap_get_client_block(r, bodyread, bodylen) > 0)
                ;
            apr_table_setn(r->notes, "error-notes",
                   "Extended TRACE request bodies cannot exceed 64k\n");
            return HTTP_REQUEST_ENTITY_TOO_LARGE;
        }

        if (res < 0) {
            return HTTP_BAD_REQUEST;
        }
    }

    ap_set_content_type(r, "message/http");

    /* Now we recreate the request, and echo it back */

    bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
#if APR_CHARSET_EBCDIC
    {
        char *tmp;
        apr_size_t len;
        len = strlen(r->the_request);
        tmp = apr_pmemdup(r->pool, r->the_request, len);
        ap_xlate_proto_to_ascii(tmp, len);
        apr_brigade_putstrs(bb, NULL, NULL, tmp, CRLF_ASCII, NULL);
    }
#else
    apr_brigade_putstrs(bb, NULL, NULL, r->the_request, CRLF, NULL);
#endif
    h.pool = r->pool;
    h.bb = bb;
    apr_table_do((int (*) (void *, const char *, const char *))
                 form_header_field, (void *) &h, r->headers_in, NULL);
    apr_brigade_puts(bb, NULL, NULL, CRLF_ASCII);

    /* If configured to accept a body, echo the body */
    if (bodylen) {
        b = apr_bucket_pool_create(bodyread, bodylen,
                                   r->pool, bb->bucket_alloc);
        APR_BRIGADE_INSERT_TAIL(bb, b);
    }

    ap_pass_brigade(r->output_filters,  bb);

    return DONE;
}

typedef struct header_filter_ctx {
    int headers_sent;
} header_filter_ctx;

AP_CORE_DECLARE_NONSTD(apr_status_t) ap_http_header_filter(ap_filter_t *f,
                                                           apr_bucket_brigade *b)
{
    request_rec *r = f->r;
    conn_rec *c = r->connection;
    const char *clheader;
    const char *protocol;
    apr_bucket *e;
    apr_bucket_brigade *b2;
    header_struct h;
    header_filter_ctx *ctx = f->ctx;
    const char *ctype;
    ap_bucket_error *eb = NULL;

    AP_DEBUG_ASSERT(!r->main);

    if (r->header_only) {
        if (!ctx) {
            ctx = f->ctx = apr_pcalloc(r->pool, sizeof(header_filter_ctx));
        }
        else if (ctx->headers_sent) {
            apr_brigade_cleanup(b);
            return OK;
        }
    }

    for (e = APR_BRIGADE_FIRST(b);
         e != APR_BRIGADE_SENTINEL(b);
         e = APR_BUCKET_NEXT(e))
    {
        if (AP_BUCKET_IS_ERROR(e) && !eb) {
            eb = e->data;
            continue;
        }
        /*
         * If we see an EOC bucket it is a signal that we should get out
         * of the way doing nothing.
         */
        if (AP_BUCKET_IS_EOC(e)) {
            ap_remove_output_filter(f);
            return ap_pass_brigade(f->next, b);
        }
    }
    if (eb) {
        int status;

        status = eb->status;
        apr_brigade_cleanup(b);
        ap_die(status, r);
        return AP_FILTER_ERROR;
    }

    if (r->assbackwards) {
        r->sent_bodyct = 1;
        ap_remove_output_filter(f);
        return ap_pass_brigade(f->next, b);
    }

    /*
     * Now that we are ready to send a response, we need to combine the two
     * header field tables into a single table.  If we don't do this, our
     * later attempts to set or unset a given fieldname might be bypassed.
     */
    if (!apr_is_empty_table(r->err_headers_out)) {
        r->headers_out = apr_table_overlay(r->pool, r->err_headers_out,
                                           r->headers_out);
    }

    /*
     * Remove the 'Vary' header field if the client can't handle it.
     * Since this will have nasty effects on HTTP/1.1 caches, force
     * the response into HTTP/1.0 mode.
     *
     * Note: the force-response-1.0 should come before the call to
     *       basic_http_header_check()
     */
    if (apr_table_get(r->subprocess_env, "force-no-vary") != NULL) {
        apr_table_unset(r->headers_out, "Vary");
        r->proto_num = HTTP_VERSION(1,0);
        apr_table_set(r->subprocess_env, "force-response-1.0", "1");
    }
    else {
        fixup_vary(r);
    }

    /*
     * Now remove any ETag response header field if earlier processing
     * says so (such as a 'FileETag None' directive).
     */
    if (apr_table_get(r->notes, "no-etag") != NULL) {
        apr_table_unset(r->headers_out, "ETag");
    }

    /* determine the protocol and whether we should use keepalives. */
    basic_http_header_check(r, &protocol);
    ap_set_keepalive(r);

    if (r->chunked) {
        apr_table_mergen(r->headers_out, "Transfer-Encoding", "chunked");
        apr_table_unset(r->headers_out, "Content-Length");
    }

    ctype = ap_make_content_type(r, r->content_type);
    if (strcasecmp(ctype, NO_CONTENT_TYPE)) {
        apr_table_setn(r->headers_out, "Content-Type", ctype);
    }

    if (r->content_encoding) {
        apr_table_setn(r->headers_out, "Content-Encoding",
                       r->content_encoding);
    }

    if (!apr_is_empty_array(r->content_languages)) {
        int i;
        char *token;
        char **languages = (char **)(r->content_languages->elts);
        const char *field = apr_table_get(r->headers_out, "Content-Language");

        while (field && (token = ap_get_list_item(r->pool, &field)) != NULL) {
            for (i = 0; i < r->content_languages->nelts; ++i) {
                if (!strcasecmp(token, languages[i]))
                    break;
            }
            if (i == r->content_languages->nelts) {
                *((char **) apr_array_push(r->content_languages)) = token;
            }
        }

        field = apr_array_pstrcat(r->pool, r->content_languages, ',');
        apr_table_setn(r->headers_out, "Content-Language", field);
    }

    /*
     * Control cachability for non-cachable responses if not already set by
     * some other part of the server configuration.
     */
    if (r->no_cache && !apr_table_get(r->headers_out, "Expires")) {
        char *date = apr_palloc(r->pool, APR_RFC822_DATE_LEN);
        ap_recent_rfc822_date(date, r->request_time);
        apr_table_addn(r->headers_out, "Expires", date);
    }

    /* This is a hack, but I can't find anyway around it.  The idea is that
     * we don't want to send out 0 Content-Lengths if it is a head request.
     * This happens when modules try to outsmart the server, and return
     * if they see a HEAD request.  Apache 1.3 handlers were supposed to
     * just return in that situation, and the core handled the HEAD.  In
     * 2.0, if a handler returns, then the core sends an EOS bucket down
     * the filter stack, and the content-length filter computes a C-L of
     * zero and that gets put in the headers, and we end up sending a
     * zero C-L to the client.  We can't just remove the C-L filter,
     * because well behaved 2.0 handlers will send their data down the stack,
     * and we will compute a real C-L for the head request. RBB
     */
    if (r->header_only
        && (clheader = apr_table_get(r->headers_out, "Content-Length"))
        && !strcmp(clheader, "0")) {
        apr_table_unset(r->headers_out, "Content-Length");
    }

    b2 = apr_brigade_create(r->pool, c->bucket_alloc);
    basic_http_header(r, b2, protocol);

    h.pool = r->pool;
    h.bb = b2;

    if (r->status == HTTP_NOT_MODIFIED) {
        apr_table_do((int (*)(void *, const char *, const char *)) form_header_field,
                     (void *) &h, r->headers_out,
                     "Connection",
                     "Keep-Alive",
                     "ETag",
                     "Content-Location",
                     "Expires",
                     "Cache-Control",
                     "Vary",
                     "Warning",
                     "WWW-Authenticate",
                     "Proxy-Authenticate",
                     "Set-Cookie",
                     "Set-Cookie2",
                     NULL);
    }
    else {
        send_all_header_fields(&h, r);
    }

    terminate_header(b2);

    ap_pass_brigade(f->next, b2);

    if (r->header_only) {
        apr_brigade_cleanup(b);
        ctx->headers_sent = 1;
        return OK;
    }

    r->sent_bodyct = 1;         /* Whatever follows is real body stuff... */

    if (r->chunked) {
        /* We can't add this filter until we have already sent the headers.
         * If we add it before this point, then the headers will be chunked
         * as well, and that is just wrong.
         */
        ap_add_output_filter("CHUNK", NULL, r, r->connection);
    }

    /* Don't remove this filter until after we have added the CHUNK filter.
     * Otherwise, f->next won't be the CHUNK filter and thus the first
     * brigade won't be chunked properly.
     */
    ap_remove_output_filter(f);
    return ap_pass_brigade(f->next, b);
}

/* In HTTP/1.1, any method can have a body.  However, most GET handlers
 * wouldn't know what to do with a request body if they received one.
 * This helper routine tests for and reads any message body in the request,
 * simply discarding whatever it receives.  We need to do this because
 * failing to read the request body would cause it to be interpreted
 * as the next request on a persistent connection.
 *
 * Since we return an error status if the request is malformed, this
 * routine should be called at the beginning of a no-body handler, e.g.,
 *
 *    if ((retval = ap_discard_request_body(r)) != OK) {
 *        return retval;
 *    }
 */
AP_DECLARE(int) ap_discard_request_body(request_rec *r)
{
    apr_bucket_brigade *bb;
    int rv, seen_eos;

    /* Sometimes we'll get in a state where the input handling has
     * detected an error where we want to drop the connection, so if
     * that's the case, don't read the data as that is what we're trying
     * to avoid.
     *
     * This function is also a no-op on a subrequest.
     */
    if (r->main || r->connection->keepalive == AP_CONN_CLOSE ||
        ap_status_drops_connection(r->status)) {
        return OK;
    }

    bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
    seen_eos = 0;
    do {
        apr_bucket *bucket;

        rv = ap_get_brigade(r->input_filters, bb, AP_MODE_READBYTES,
                            APR_BLOCK_READ, HUGE_STRING_LEN);

        if (rv != APR_SUCCESS) {
            /* FIXME: If we ever have a mapping from filters (apr_status_t)
             * to HTTP error codes, this would be a good place for them.
             *
             * If we received the special case AP_FILTER_ERROR, it means
             * that the filters have already handled this error.
             * Otherwise, we should assume we have a bad request.
             */
            if (rv == AP_FILTER_ERROR) {
                apr_brigade_destroy(bb);
                return rv;
            }
            else {
                apr_brigade_destroy(bb);
                return HTTP_BAD_REQUEST;
            }
        }

        for (bucket = APR_BRIGADE_FIRST(bb);
             bucket != APR_BRIGADE_SENTINEL(bb);
             bucket = APR_BUCKET_NEXT(bucket))
        {
            const char *data;
            apr_size_t len;

            if (APR_BUCKET_IS_EOS(bucket)) {
                seen_eos = 1;
                break;
            }

            /* These are metadata buckets. */
            if (bucket->length == 0) {
                continue;
            }

            /* We MUST read because in case we have an unknown-length
             * bucket or one that morphs, we want to exhaust it.
             */
            rv = apr_bucket_read(bucket, &data, &len, APR_BLOCK_READ);
            if (rv != APR_SUCCESS) {
                apr_brigade_destroy(bb);
                return HTTP_BAD_REQUEST;
            }
        }
        apr_brigade_cleanup(bb);
    } while (!seen_eos);

    return OK;
}

/* Here we deal with getting the request message body from the client.
 * Whether or not the request contains a body is signaled by the presence
 * of a non-zero Content-Length or by a Transfer-Encoding: chunked.
 *
 * Note that this is more complicated than it was in Apache 1.1 and prior
 * versions, because chunked support means that the module does less.
 *
 * The proper procedure is this:
 *
 * 1. Call ap_setup_client_block() near the beginning of the request
 *    handler. This will set up all the necessary properties, and will
 *    return either OK, or an error code. If the latter, the module should
 *    return that error code. The second parameter selects the policy to
 *    apply if the request message indicates a body, and how a chunked
 *    transfer-coding should be interpreted. Choose one of
 *
 *    REQUEST_NO_BODY          Send 413 error if message has any body
 *    REQUEST_CHUNKED_ERROR    Send 411 error if body without Content-Length
 *    REQUEST_CHUNKED_DECHUNK  If chunked, remove the chunks for me.
 *    REQUEST_CHUNKED_PASS     If chunked, pass the chunk headers with body.
 *
 *    In order to use the last two options, the caller MUST provide a buffer
 *    large enough to hold a chunk-size line, including any extensions.
 *
 * 2. When you are ready to read a body (if any), call ap_should_client_block().
 *    This will tell the module whether or not to read input. If it is 0,
 *    the module should assume that there is no message body to read.
 *
 * 3. Finally, call ap_get_client_block in a loop. Pass it a buffer and its size.
 *    It will put data into the buffer (not necessarily a full buffer), and
 *    return the length of the input block. When it is done reading, it will
 *    return 0 if EOF, or -1 if there was an error.
 *    If an error occurs on input, we force an end to keepalive.
 *
 *    This step also sends a 100 Continue response to HTTP/1.1 clients if appropriate.
 */

AP_DECLARE(int) ap_setup_client_block(request_rec *r, int read_policy)
{
    const char *tenc = apr_table_get(r->headers_in, "Transfer-Encoding");
    const char *lenp = apr_table_get(r->headers_in, "Content-Length");

    r->read_body = read_policy;
    r->read_chunked = 0;
    r->remaining = 0;

    if (tenc) {
        if (strcasecmp(tenc, "chunked")) {
            ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r,
                          "Unknown Transfer-Encoding %s", tenc);
            return HTTP_NOT_IMPLEMENTED;
        }
        if (r->read_body == REQUEST_CHUNKED_ERROR) {
            ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r,
                          "chunked Transfer-Encoding forbidden: %s", r->uri);
            return (lenp) ? HTTP_BAD_REQUEST : HTTP_LENGTH_REQUIRED;
        }

        r->read_chunked = 1;
    }
    else if (lenp) {
        char *endstr;

        if (apr_strtoff(&r->remaining, lenp, &endstr, 10)
            || *endstr || r->remaining < 0) {
            r->remaining = 0;
            ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r,
                          "Invalid Content-Length");
            return HTTP_BAD_REQUEST;
        }
    }

    if ((r->read_body == REQUEST_NO_BODY)
        && (r->read_chunked || (r->remaining > 0))) {
        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r,
                      "%s with body is not allowed for %s", r->method, r->uri);
        return HTTP_REQUEST_ENTITY_TOO_LARGE;
    }

#ifdef AP_DEBUG
    {
        /* Make sure ap_getline() didn't leave any droppings. */
        core_request_config *req_cfg =
            (core_request_config *)ap_get_module_config(r->request_config,
                                                        &core_module);
        AP_DEBUG_ASSERT(APR_BRIGADE_EMPTY(req_cfg->bb));
    }
#endif

    return OK;
}

AP_DECLARE(int) ap_should_client_block(request_rec *r)
{
    /* First check if we have already read the request body */

    if (r->read_length || (!r->read_chunked && (r->remaining <= 0))) {
        return 0;
    }

    return 1;
}

/* get_client_block is called in a loop to get the request message body.
 * This is quite simple if the client includes a content-length
 * (the normal case), but gets messy if the body is chunked. Note that
 * r->remaining is used to maintain state across calls and that
 * r->read_length is the total number of bytes given to the caller
 * across all invocations.  It is messy because we have to be careful not
 * to read past the data provided by the client, since these reads block.
 * Returns 0 on End-of-body, -1 on error or premature chunk end.
 *
 */
AP_DECLARE(long) ap_get_client_block(request_rec *r, char *buffer,
                                     apr_size_t bufsiz)
{
    apr_status_t rv;
    apr_bucket_brigade *bb;

    if (r->remaining < 0 || (!r->read_chunked && r->remaining == 0)) {
        return 0;
    }

    bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
    if (bb == NULL) {
        r->connection->keepalive = AP_CONN_CLOSE;
        return -1;
    }

    rv = ap_get_brigade(r->input_filters, bb, AP_MODE_READBYTES,
                        APR_BLOCK_READ, bufsiz);

    /* We lose the failure code here.  This is why ap_get_client_block should
     * not be used.
     */
    if (rv != APR_SUCCESS) {
        /* if we actually fail here, we want to just return and
         * stop trying to read data from the client.
         */
        r->connection->keepalive = AP_CONN_CLOSE;
        apr_brigade_destroy(bb);
        return -1;
    }

    /* If this fails, it means that a filter is written incorrectly and that
     * it needs to learn how to properly handle APR_BLOCK_READ requests by
     * returning data when requested.
     */
    AP_DEBUG_ASSERT(!APR_BRIGADE_EMPTY(bb));

    /* Check to see if EOS in the brigade.
     *
     * If so, we have to leave a nugget for the *next* ap_get_client_block
     * call to return 0.
     */
    if (APR_BUCKET_IS_EOS(APR_BRIGADE_LAST(bb))) {
        if (r->read_chunked) {
            r->remaining = -1;
        }
        else {
            r->remaining = 0;
        }
    }

    rv = apr_brigade_flatten(bb, buffer, &bufsiz);
    if (rv != APR_SUCCESS) {
        apr_brigade_destroy(bb);
        return -1;
    }

    /* XXX yank me? */
    r->read_length += bufsiz;

    apr_brigade_destroy(bb);
    return bufsiz;
}

/* Context struct for ap_http_outerror_filter */
typedef struct {
    int seen_eoc;
} outerror_filter_ctx_t;

/* Filter to handle any error buckets on output */
apr_status_t ap_http_outerror_filter(ap_filter_t *f,
                                     apr_bucket_brigade *b)
{
    request_rec *r = f->r;
    outerror_filter_ctx_t *ctx = (outerror_filter_ctx_t *)(f->ctx);
    apr_bucket *e;

    /* Create context if none is present */
    if (!ctx) {
        ctx = apr_pcalloc(r->pool, sizeof(outerror_filter_ctx_t));
        f->ctx = ctx;
    }
    for (e = APR_BRIGADE_FIRST(b);
         e != APR_BRIGADE_SENTINEL(b);
         e = APR_BUCKET_NEXT(e))
    {
        if (AP_BUCKET_IS_ERROR(e)) {
            /*
             * Start of error handling state tree. Just one condition
             * right now :)
             */
            if (((ap_bucket_error *)(e->data))->status == HTTP_BAD_GATEWAY) {
                /* stream aborted and we have not ended it yet */
                r->connection->keepalive = AP_CONN_CLOSE;
            }
            continue;
        }
        /* Detect EOC buckets and memorize this in the context. */
        if (AP_BUCKET_IS_EOC(e)) {
            ctx->seen_eoc = 1;
        }
    }
    /*
     * Remove all data buckets that are in a brigade after an EOC bucket
     * was seen, as an EOC bucket tells us that no (further) resource
     * and protocol data should go out to the client. OTOH meta buckets
     * are still welcome as they might trigger needed actions down in
     * the chain (e.g. in network filters like SSL).
     * Remark 1: It is needed to dump ALL data buckets in the brigade
     *           since an filter in between might have inserted data
     *           buckets BEFORE the EOC bucket sent by the original
     *           sender and we do NOT want this data to be sent.
     * Remark 2: Dumping all data buckets here does not necessarily mean
     *           that no further data is send to the client as:
     *           1. Network filters like SSL can still be triggered via
     *              meta buckets to talk with the client e.g. for a
     *              clean shutdown.
     *           2. There could be still data that was buffered before
     *              down in the chain that gets flushed by a FLUSH or an
     *              EOS bucket.
     */
    if (ctx->seen_eoc) {
        for (e = APR_BRIGADE_FIRST(b);
             e != APR_BRIGADE_SENTINEL(b);
             e = APR_BUCKET_NEXT(e))
        {
            if (!APR_BUCKET_IS_METADATA(e)) {
                APR_BUCKET_REMOVE(e);
            }
        }
    }

    return ap_pass_brigade(f->next,  b);
}

