# $Id: eicon-2,v 1.3 2007/07/20 18:15:00 faxguy Exp $
#
# prototype config file for the Eicon Diva ISDN Modem
#

#
# CONFIG: CLASS2:Eicon*-*-*
#
# BEGIN-SERVER
# END-SERVER
#

ModemType:		Class2
ModemRate:		19200	# on boards supporting V.34-fax,
				# this may need to be 57600
ModemFlowControl:	rtscts
ModemNoFlowCmd:		AT&K0
ModemSoftFlowCmd:	AT&K4
ModemHardFlowCmd:	AT&K3

#
# Enable this to set Caller*ID Number
#
#ModemSetOriginCmd:     AT+iO%d

#
# Make sure the modem gives us Caller*ID in a legible way.
#
ModemResetCmds:         AT#CID=14

#
# Eicon recommends initializing with AT+iQ=a1 where "1" is
# the controller number.  This command binds the tty to that
# controller and bypasses the "channel pool" approach.
#
#ModemResetCmds:         AT#CID=14+iQ=a1

Class2APQueryCmd:	none
Class2SPLCmd:		none
Class2TBCCmd:		none
Class2ECMType:		2.0	# follows Class 2.0 spec, not Class 2
